- 您现在的位置：买卖IC网 > Sheet目录1356 > HRMJ-U.FLP (Hirose Electric Co Ltd)CONN ADAPTER U.FL PLUG-SMA JACK
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
check the q statusontheHirosewebsiteRoHSsearchat Connectors 1.9mm or your Hirosesales Height
All non-RoHS products have been discontinued, or will be discontinued soon. Please U.FL Series products Ultra Small Surface Mount Coaxial www.hirose-connectors.com, or contact 2.4mm Mated representative.
s Usage Precautions
1. Plugs
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
aligned and the connectors can be mated. The "click" will confirm fully
Extraction Jig
(1) Mating / unmating
mated connection.Do not attempt to insert on an extreme angle.
U.FL Cable
Assembly
U.FL-R-SMT-1
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
(2) Pull forces on the
U.FL-LP
Cable Assembly
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
cable after connectors
are mated.
(3) Precautions
U.FL-R-SMT-1
Do NOT forcefully twist or deform wires.
3N max (U.FL-LP(V)-040, U.FL-LP-062)
4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
2. Receptacles
250 ? max. for
[?]
10 seconds
q The temperature of the printed circuit board
(1) Recommended reflow
temperature profile
260
240
220
200
180
160
140
120
100
80
Preheat
(130 to 180?)
120 seconds max.
230?
220?
50 seconds max.
60 seconds max.
surface temperature at the points of contact with
the terminals.
w Reflow soldering should be performed at a
printed circuit surface temperature of 250°C max.
e In individual applications the actual temperature
may vary, depending on the solder paste type,
volume / thickness and board size / thickness.
Consuly your solder paste and equipment
manufacturer for specific recommendations.
Time
(2) Recommended
manual soldering
(3) Recommended metal
mask thickness
(4) Reflow cycles
Manual soldering: 350?C for 5 seconds
0.1 to 0.12 mm
2 times
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments:
(1) Operating environment
(2) Storage conditions -
Receptacle
? Exposed to a excessive amounts of fine particles and dust
? Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
? Environments having large rapid variations in temperature.
Store in the Hirose Electric packaging.
Temperature: -10 to +40?, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
7
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
HTS-136-G-AA
CONN HEADER 36POS .100" T/H GOLD
IC11SA-BUR-PNEJL
CONN EJECTOR GUIDE LEFT POP-UP
IC15A-G-PEJL
CONN ACCESSY IC15A PC CARD GUIDE
IC1G-68PD-1.27SF
MEM CARD CON 68PIN SMD W/O EJECT
IC7-68PDR-1.27DS-EJL
CONN MEM CARD LT/WGT REV LFT/EJC
ICM-MA50H-SS52-1141
CF CARD CONN MA TYPE 50 CIRCUIT
ID1A-6S-2.54SF
CONN SOCKET SIM CARD
ID2M-8S-2.54DS
CONN SMARTCARD 8PIN 2.54MM R/A
相关代理商/技术参数
HRMJ-U.FLP(40)
功能描述:射频适配器 - 系列之间 ADAPT U.FL PLUG-SMA JACK RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-LA-1(40)
功能描述:射频适配器 - 系列之间 RF COAX CONN ADAPTER RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-LA-3(40)
功能描述:射频适配器 - 系列之间 RF COAX CONN ADAPTER RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-LA-3(41)
功能描述:射频适配器 - 系列之间 RF COAX CONN ADAPTER RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-LA5(40)
功能描述:射频适配器 - 系列之间 RF COAX CONN ADAPTER RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-ST1
制造商:Hirose 功能描述:
HRMJ-U.FLP-ST1(40)
功能描述:射频适配器 - 系列之间 ADAPT U.FL PLUG-SMA JACK RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass
HRMJ-U.FLP-ST1A(40)
功能描述:射频适配器 - 系列之间 RF COAX CONN ADAPTER RoHS:否 制造商:Amphenol Connex 侧1射频系列:SMA 侧1性别:Jack (Female) 侧1极性:Normal 侧1体类型:Bulkhead 侧2射频系列:TNC 侧2性别:Jack (Female) 侧2极性:Normal 侧2体类型:Bulkhead 阻抗:50 Ohms 适配器类型:Straight 频率范围:DC to 11 GHz 触点电镀:Gold 外壳电镀:Gold 主体材料:Brass